Teaching Experience : 24 years

2011

Associate Professor, Rajarambapu Institute of Technology, Rajaramnagar

2005-2011

Assistant Professor, Rajarambapu Institute of Technology, Rajaramnagar

2000-2005

Lecturer, Rajarambapu Institute of Technology, Rajaramnagar

1995-2000

Lecturer, Rajarambapu Institute of Technology, Rajaramnagar

 

Industrial experience:8 years

1993-1995

Production Engineer, Duflon Polymers Pvt. Ltd; Mahad

1992-1993

QC & Inspection Engineer, Al-Habib Engineering Pvt. Ltd; Mahad

1989-1992

Project Engineer, Gandhi-Shafer Controls Pvt. Ltd., Mumbai

1986-1989

Sales Engineer, MAS Engineering Pvt. Ltd., Mumbai

• Non-conventional Machining Processes
• Engineering Education
• Computer-aided manufacturing

A) Publications (in International Journals)

• Ms. Shraddha Sonawale Prof. Mukund V. Kavade Mr. Abhijit Kavathekar Design and Development of Pick and Place Gantry System on Conveyor International Research Journal of Engineering and Technology (IRJET) 7 7 131-135 July 2020 25
• Prof. Mukund V. Kavade "An Effective use of Visual Aids for Teaching Computer Aided Manufacturing (CAM) Laboratory – A case Study" Journal of Engineering Education Transformations (JEET) 33 551-555 Jan 2020
• Prof. Mukund V. Kavade Dr. Suhas S. Mohite Dr. deepak r. Unaune "Application of metal powder to improve metal removal rate in Electric Discharge Machining" Material Today 16 398-404 July 2019 11
• Amir K. Deshmukh, M. V. Kavade, 2017, Study and Recovery of Heat Systems for SO2 gas generationprocess in sugar industry, International research journal of engineering and technology (IRJET), 485 – 488
• Tushar T. Bhausare, M. V. Kavade, 2017, Design of geras for drilling machine, International journal of scientific & engineering research, 8(4), 227 – 229.
• Shivraj S. Zambare , M.V.Kavade , 2016, Investigation of Variability of Cylinder Head Machine Process, International Journal of Engineering Research in Mechanical and Civil Engineering,1(2), 64-68.
• Amey S. Kulkarni, Mukund V. Kavade, Gunaji A. Sawant, 2016, Optimization of Multi-pass Turning Parameter to improve Surface Roughness of EN8 (080M40) by Response Optimizer, International Journal of Engineering Development and Research, 4(2), 1136-1140.
• SuyogVitnor,MukundKavade, 2016, Finite Element Analysis of Friction Plate of Diaphragm Spring Clutch for TD-3250 Vehicle, International Journal of  Science and Research, 5(4), 1771-1775.
• A.T. Pokarnrkar, N.L.Soni, M.V.Kavade, 2016, Design of Fretting Fatigue Testing Machine, International Journal of Engineering  Research and Technology, 5(5), 729-731.
• Mukund V. Kavade, Martand T. Telsang, Sushma S. Kulkarni, Impact of Outcomes Based Education on Faculty Teaching Index, Journal of Engineering Education Transformation.
• Mukund V. Kavade, 2015, Assessment And Attainment Of Course Outcomes And Program Outcomes, Journal of Engineering Education Transformation, 28(2,3).
• Rohit R Patil, M.V.Kavade, 2015, Parametric Optimization of Gas Metal Arc Welding for S355J2N by using Design of Experiment, International Journal for Research in Applied Science & Engineering Technology, 2(10), 44-48.
• Amey S. Kulkarni, Mukund V. Kavade, 2015, Optimization of Multi-pass Turning Parameters by Response Surface Methodology, International Journal for Research in Applied Science & Engineering Technology, 3(6), 106-110.
• Moshim Mulla, Ansar Mulla, Mahesh Latte, Mukund Kavade, Sudhanva Deshpande, 2015, Implementation of Lean concept and performance analysis of manufacturing system using simulation : A case study, International Journal of Applied Engineering Research, 10(61), 373-377.
• S.S.Desai, M.V.Kavade, 2013, Development of Thermo-physical Model of Powder Mixed Electrical Discharge Machine using ANSYS, International Journal of Advanced Engineering Technology, 4(4), 70-74.
• G.C.Mekalke, M.V.Kavade, S.B.Kumbhar, 2013, Studies on Double Stage Engine Mount for Vibration Reduction, International Journal of Engineering  Research and Applications, 3(4), 1170-1173.
• M.A.Patil, D.S.Chavan, M.V.Kavade, U.S.Ghorpade, 2013, FEA of Tie Rod of Sterring System of Car, International Journal of Application or Innovation in Engineering & Management, 2(5), 223-227.
• P.K.Parase, M.V.Kavade, S.H.Limaye, 2013, Design, Development and Testing of Butterfly Valve Leakage Test Rig, International Journal on Mechanical and Robotics, 1(2), 74-81.
• Vaibhav B. Pansare, M.V.Kavade, 2012, Optimization of Cutting Parameters in Multipass Turning Operation using ANT Colony Algorithm, International Journal of Engineering Science & Advanced Technology, 2(4), 955-960.
• Umesh S. Ghorpade, D.S.Chavan, M.V.Kavade, 2012, Static Structural and Modal Analysis of Engine Bracket using Finite Element Analysis, International Journal of Engineering Research & Technology, 1(10), PP:01-06.
• M.V.Kavade, S.D.Kadam, 2012, Parameter Optimization of Injection Molding of Polypropylene by using Taguchi Methodology, IOSR Journal of Mechanical and Civil Engineering, 4(4), 49-58.
• NiyatiPatil, MukundKavade, AmolPatil, 2012, Study of Gas Flow Behavior in HRSG Inlet Duct with CFD Tools, International Journal of Mechanical  Engineering applications Research, 3(1), 146-151.
• C.A.Waghmare, M.V,Kavade, 2011, Investigation of effect of cutting parameters on Residual Stresses developed during milling operation, International Journal of Engineering Science Research, 2(5), 467-471.
• B.R.Jadhav, M.V.Kavade, 2011, Experimental Study of Al-Si Alloy Plate on Electric Discharge Machining Using Tungsten Electrode, International Journal of  Advanced Engineering Research and Studies, 1(1), 222-227.
• Vinod Hange, Bharat Shirke, MunjabadasKadam 3, D.Khedekar 4, M.V.Kavade 5, 2011, Determination and Optimization of Chatter, Ovality & Surface Roughness in Crankshaft Grinding Process by using Taguchi Method of Analysis, International Journal of Advances in Sciences and Technology, 3(4), 65-77. 
• C.A.Waghmare, M.V,Kavade, Measurement of Residual Stresses during Machining by using Hole-Drilling Strain Gage Method.

B) Publications (in Indian Journals)

• An Effective use of Visual Aids for Teaching Computer Aided Manufacturing (CAM) Laboratory – A case Study, JEET Under Printing
• Impact of IUCEE IGP Engineering educator’s certification program on Teching perfromnace of participants, 2017, Journal of Engineering Education Trasformations, 3(30), 
• Ranjeet A. Patil, M./ V. Kavade, 2017, Delamination detection in Composite Sandwich Beam: Experimental Study, Journal of advances in Science and Technology, 13(1), 199-204
• Ranjeet Ghule, M. V. Kavade, 2017, Design of Cranck shaft of micro alloy steel by using MATLAB for fatigue failure, Journal of advances in Science and Technology, 13(1), 23-30
• Sagar M. Gaikwad, M.V.Kavade, 2015, Weight Optimization of CAM, Technical Research Organization India, 2(4), 115-119.
• AwasareAnantDattatray, M.V.Kavade, A Review of Assembly Line Changes for Lean Manufacturing, IOSR Journal of Mechanical and Civil Engineering, PP:01-05.

C) Publications (in peer-reviewed conferences held abroad)

• Vijay Kadlag, MunjadasKadam, MukundKavade 3, 2007, Effect of cutting conditions on surface roughness and cutting speed in WEDM, Eighth Int. Conference on Opers. & Quant. Management, 549-555.
• Pradeep Kashinath Waychal, Mukund V. Kavade, 2017, Goal setting and faculty development in an Indian Engineering college, American Society for Engineering Education.

D) Publications /Presentation(in peer-reviewed conferences held in India)

• Shubham K. Patil, Prof. Mukund V. Kavade "Experimental investigation of drilled epoxy resin glass fiber by using filler material," Proceedings of 4 th RIT Post Graduate Conference (RIT PG Con-18) 1-5 Jan 2018
• Vishal S. Masutge, Prof. Mukund V. Kavade "BEHAVIOUR OF INLINE KNOCKOUT MACHINE OPERATING UNDER VIBRATION", Proceedings of 4 th RIT Post Graduate Conference (RIT PG Con-18) 438-443 April 2018
• Ashwajit D. Awatade Prof. Mukund V. Kavade "FEASIBILITY STUDY OF ELECTROMAGNETIC AIRCRAFT LAUNCHING SYSTEM (EMALS) BY USING ADVANCE ANALYSIS TOOLS." Proceedings of 4 th RIT Post Graduate Conference (RIT PG Con-18) 444-447 April 2018
• Davale Anup Arvind Prof. Mukund V. Kavade STRESS ANALYSIS OF FUNCTIONALLY GRADED SHELL Proceedings of 4 th RIT Post Graduate Conference (RIT PG Con-18) 448-456 April 2018
• Application of metal powder to improve metal removal rate in Electric Discharge Machining, Materials Today: Proceedings, Volume no.10, Pages: 398-404, H Index 11, ISBN00002014
• Shubham K. Patil, Mukund V. Kavade, Experimental investigation of drilled epoxy resin glass fiber by using filler material, 2018, Proceedings of 4th RIT Post Graduate Conference (RIT PG Con-18), 576-578
• Vishal S. Masutge, Mukund V. Kavade, Behaviour of inlet knockout machine operating under vinration, 2018, Proceedings of 4th RIT Post Graduate Conference (RIT PG Con-18), 438-443
• Aswajit D. Awatade, M. V. Kavade, Feasibility study of electro-magnetic aircraft launching system (EMALS) by using advance analysis tools, 2018, Proceedings of 4th RIT Post Graduate Conference (RIT PG Con-18), 444-447
• Anup A. Davale, M. V. Kavade, Stess analysis of functionally graded shell, 2018, Proceedings of 4th RIT Post Graduate Conference (RIT PG Con-18), 48-
• Abhijit P. Maske, M. V. Kavade, 2016, Industrial Internet Technology, Prooceedings of the modern Era Research in Mechanical Engineering – 2016 (MERME-16)
• Ranjeet N. Ghule, M. V. Kavade, 2017, Design of crankshaft of micro alloy steel by using MATLAB for fatigue strength, Proceedings of the 3rd RIT Post Graduate Conference (RIT PG Con-17), 410-416
• Abhijjet P. Maske, M. V. Kavade, 2017, Customization of 3D CAD of radiator tanks and header plate using creo software, Proceedings of the 3rd RIT Post Graduate Conference (RIT PG Con-17), 404-409
• Prasanna A. Dudhal, M. V. Kavade, 2017, New production layout design for increasing production rate using SLP method: A case study of Fabrication Industry, Proceedings of -the 3rd RIT Post Graduate Conference (RIT PG Con-17), 577-583
• Mangesh A. Kadam, M. V. Kavade, 2017, Numerical simulation of nuclear shock wave propagating through conduit with side branch, Proceedings of the 3rd RIT Post Graduate Conference (RIT PG Con-17), 391-393. 
• SuyogVitnor, MukundKavade, A.B.Mulani, 2016, Design of Diaphragm Spring Clutch for TD-3250 Vehicle, Proceeding of the 2nd National Conference for Engineering Post Graduate Students,RIT.
• Sagar D. Sanap, Mukund V. Kavade, 2016, Optimization of Wire Electric Discharge Machining Process using Response Surface Methodology, Proceeding of the 2nd National Conference for Engineering Post Graduate Students,RIT.
• Prasanna A. Dudhal, M. V. Kavade, 2016, Hybrid layeree manufacturing: Rapid tooling process, Prooceedings of the modern Era Research in Mechanical Engineering – 2016 (MERME-16)
• Ranjeet A. Patil, M. V. Kavade, 2016, Delamination detection in sandwich structure using frequency response function – Review, Prooceedings of the modern Era Research in Mechanical Engineering – 2016 (MERME-16)
• PatilVinayak V., Kavade M.V., Viraj I. Pasare, 2015, Analysis of Welded Joint in Fillet Weld using Finite Element Method, 5th National Conference on Emerging Trends in Engineering, Technology &Aechitecture, PP:01-06.
• P.R.Patil, M.V.Kavade, P.C.Wadekar, D.Srinivas, 2014, Process improvement to reduce field failure and line rejection of rear wheel axle- A case study, International Conference on Mechanical and Industial Engineering.
• SachinkumarJagtap, MukundKavade, 2014, Orbital Riveting- A Design and Development of new Machine, Proceeding of 7th IRF International Conference, Pune, PP:01-05.
• Mahammadumar M. Jamadar, M.V.Kavade, 2014, Effect of Aluminium Powder Mixed EDM on Machining Characteristics of Die Steel (AISI D3), Proceeding of 10th IRF International Conference, Pune, 120-123.
• Amar Ashok Khot, M.V.Kavade, 2014, Analysis for gate location optimization for a thin walled injection molding process, International Conference on Advances in Engineering Technolody and Science, 87-90.
• MoshimMulla, MukundKavade, SudhanvaDeshpande, 2014, Integration of Three Production Lines for Better Productivity and Low Wastages-with using WITNESS Simulation, Proceeding of 7th IRF International Conference, Pune, 115-119.
• S.V.Janugade, M.V.Kavade, S.S.Mohite, 2013, Study the effect of SIC, AL and mixture of SIC-AL powder mixed dielectric on material removal rate, tool wear rate and RWR of AISI D3 Die steel in roughing EDM, Proceedings of International Conference on Advances in Mechanical Engineering.
• P.K.Parase, M.V.Kavade, S.H.Limaye, 2013, Design, Development and Testing of Butterfly Valve Leakage Test Rig, 4th International Conference on Mechanical and Industrial Engineering,Pune, 104-111.
• Sujit P. Patil, M.V.Kavade, U.M.Nimbalkar, VinaayPatil 4, 2012, Finite Element Analysis of Partitioned Vertical Storage Column, International Conference on Advances in Mechanical and Industrial Engineering, Nasik.
• Vijay Kadlag, MunjadasKadam, MukundKavade 3, 2007, Investigation into the Machining Parameters in Wire-Cut Electrical Discharge Machining Process, International Conference on Advances in Manufacturing & Technology Management, 265-269.
• E) National Conference
• Awdhut Dipakkuma rLokare, M.V,Kavade, 2015, Modification of Front Axle Beam Process Line to Improve Productivity by using Value Stream Mapping Tool, National Conference for Engineering Post Graduate Students,RIT, 585-591.
• Rohit Vijaykumar Mali, M.V.Kavade, 2015, Screening Experiment design for Powder Mixed Electrical Discharge Machining, National Conference for Engineering Post Graduate Students,RIT, 84-88.
• Patil S.H., Kavade M.V., 2012, FEA Based analysis of XY Flexural Scanning Mechanism, Proceeding of National Conference on Innovations in Mechanical Engineering, Pune, 763-768.
• D.V.Lohar, M.V.Kavade, 2009, Performance Evaluation of Minimum Quantity Lubrication (Mql) in Hard Turning of AISI 4340 Steel Using CBN Tool, Proceeding of National Conference for Post Graduate Student and Technology Faculty.
• PatilS.S., Shinde B.M., Katikar R.S., Kavade M.V., 2004, M.O.S.T.-An Advanced Technique to improve productivity, National Conference on Recent Trends in  CAD/CAM/CAE, RIT, PP:12-18.
• Suresh M. Sawant, M.V.Kavade, R.S.Birajdar, 2004, E-Manufacturing, National Conference on Recent Trends in  CAD/CAM/CAE, RIT, 18-23.
• N.K.Chhapkhane, M.V.Kavade, M.V.Khot, 2004, Computer Integrated Processing: Real Time Optimization for Procrss Industries, National Conference on Recent Trends in  CAD/CAM/CAE, RIT, 29-33.
• Shinde B.M., Katikar R.S., Kavade M.V., 2004, CPP- A Tool for Productivity Improvement in Gear Manufactiring, National Conference on Recent Trends in  CAD/CAM/CAE, RIT, 42-48.

E) National Conference

• Nil

F) International Conference

• Nil

G) Book

i) Books Published

• A monograph on “Quality Management – Principles and Practices, published by Indian Society for Training and development, Islampur chapter.

ii) Chapters in Book

• Nil

• Certified Trainer for IUCEE IGIP Teachers Training Programs

• Corrugated sheet folding machine
• Parametric optimization of EDM process.
• Design and development of orbital riveting machine and comparison of performance with conventional riveting machine.
• Modification of plant layout for better integration and productivity using simulation