Ph.D. (2014)
IIT, Kharagpur
M.E. (Mech) (2005)
Shivaji University, Kolhapur
B.E. (Mech) (2000)
Shivaji University, Kolhapur
Teaching Experience: 15 years
2004
Associate Professor at R.I.T. Rajaramnagar, Sakharale. (Sangli)
2010-2014
Worked as Teaching Assistant at IIT Kharagpur during Ph D programme
2002-2004
Teaching Assistant at Govt, College of Engg. Karad during M. E. program
Rahul U. Urunkar, Sharad D. Patil, Enhancement of heat and mass transfer characteristics of metal hydride reactor for hydrogen storage using various nanofluids, International Journal of Hydrogen Energy 46(2021) 19486-97(Elsevier)
Suraj M. Sande, Sharad D. Patil, Controlling the Growth of Sugarcane Plant in the Nursery During Germination Process by Detecting and Changing Temperature and Humidity through IoT - A Review, International Research Journal of Engineering and Technology (IRJET) Volume 8, Issue 5, May 2021. https://www.irjet.net/volume8-issue5 S.No: 669
Neha U. Karande, Sharad D. Patil, A. Choudhary, “Selection and Development of Crankcase Ventilation System for BS (CEV) IV off Highway Engine”, International Research Journal of Engineering and Technology (IRJET) Volume 7, Issue 10, October 2020 https://irjet.net/volume7-issue10 S.No: 176
Aniket B. Chougule, Sharad D. Patil,”Numerical Comparative Studies of Wall Shear Stress in Coronary Artery Bypass Grafting”, International Journal of Scientific Research and Engineering Development, Volume 3, Issue 5, October 2020 ISSN: 2581-7175. http://www.ijsred.com/volume3-issue5-part10.html
Sharad D. Patil, Rajendra V. Pawar and Abhijeet P. Shah, Experimental Analysis of Effect of Mixed Biodeisel Belnds on Performance, Combustion,and Emission of Variable Compassion Ratio Engine, AMSE Journals - AMSE IIETA publication – 2019 - Series: Modelling, Measurement & Control C; Vol. 80; No1, March 2019; pp 24-31
Sharad D. Patil and Abhijeet P. Shah, Performance, Emission and Combustion Analysis of Biodiesel Extracted from Acidic oil: A By-product of Soybean Oil Refining Process, AMSE Journals - AMSE IIETA publication – 2017 - Series: Modelling C; Vol. 78; No3; 2017, pp 337 -350.
Sharad D Patil , M. Ram Gopal, Entropy generation and its relation to heating and cooling requirements of a metal hydride hydrogen storage reactor, International Journal of Hydrogen Energy 38(2013) 13687-93(Elsevier)
Sharad D Patil, M. Ram Gopal, Analysis of a metal hydride reactor for hydrogen storage, International Journal of Hydrogen Energy 38 (2013) 942–51. (Elsevier)
Randhiy Y Chavan, Sharad D Patil, ‘Analysis of Flow & Heat Transfer Enhancement of Turmeric Cooking Steam Generator’ International Virtual Conference on Innovation Challenges and Advances in Engineering & Technology (ICAET-2021) organized Vishwaniketan's Institute of Management Entrepreneurship and Engineering Technology (ViMEET), Khalapur, Maharashtra, held on 05th – 06th, September 2021, in Association with Institute For Engineering Research and Publication.
Rahul A. Sawant and Sharad D. Patil, Design and Analysis of oven for heat loss used for drying painted three wheeler chassis, International Conference on Material Science and Engineering, organized by Dept. of Mech. Engg., Dr. B R Ambedkar NIT Jalandhar Punjab during 11-12th June- 2019
Swapnil V. Jadhav and Sharad D. Patil, A Review on Thermal Analysis of Nano Particle Based Fluid, International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by Dept. of Mech. Engg., Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada, AP during 3rd -4th January- 2019
Pragati A Jagdale, S.S. Shirgupikar and Sharad D. Patil, Effect of different electrode materials on the performance of EDM: A Review, International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by Dept. of Mech. Engg., Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada, AP during 3rd -4th January- 2019
P. P. Garud, and Sharad D. Patil, Overview of use of composite materials in vapor compression refrigeration system (VCRS), International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by Dept. of Mech. Engg., Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada, AP during 3rd -4th January- 2019
Shwetali S Patil, Sharad D. Patil, Numerical investigation of mini-channel metal hydride reactor for hydrogen storage, Proceedings of the 24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS Pilani, Hyderabad, India.
Sagar C Wangdare, Sharad D. Patil, Numerical investigation on influence of variation in offset ribs on fluid flow and heat transfer in microchannel heat sink, Proceedings of the 24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS Pilani, Hyderabad, India.
Vishakha V. Chopade, Sharad D. Patil, Numerical Analysis of Heat Transfer Enhancement in Artificially Roughened Solar Air Heater, 6th International Conference on Advances in Energy Research (ICAER 2017) IIT Bombay 12-14 Dec 2017. pp-155-161
Shreyas Patil, Sharad D. Patil, Numerical Investigation of design mono hull under extreme irregular sea conditions using Boundary Element Method and Strip theory, International conference on Emerging Technological Innovations in Mechanical Engineering,26th -27th May 2017 at R R Institute of Technology,Bengaluru.
Sanketkumar S. Kurade, Sharad D. Patil, Simulation of Thermo-mechanical Stresses in Gas Turbine Blades of an Aero-engine under Service Condition, 2nd National Conference on Recent Trends in Mechanical Engineering (MCRTME), WCE, Sangli -June- 2017.
Madhuri V. Nimbalkar, Sharad D. Patil, Design Optimization and Modeling of Compact Metal Hydride Reactor for Hydrogen Storage, 3rd Int conference on Industrial Engineering, ICIE 2015, pp 881-886, SVNIT Surat.
Madhuri V. Nimbalkar, Sharad D. Patil, ‘Design Optimization and Modeling of Compact Metal Hydride Reactor for Hydrogen Storage, 3rdInt conference on Industrial Engineering, ICIE 2015, pp 881-886, SVNIT Surat.
Nikhil U Kamble, Sharad D. Patil, "Techno-economic Analysis of the Solar, Wind and Hybrid Systems" at National conference on Emerging Trends in Mechanical Engineering held during 7-8 Feb 2019 at VIT Pune.
Suraj P. Godsae, Sharad D. Patil, Numerical Analysis of Splitted Cylindrical Metal Hydride Hydrogen Storage Reactor, Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) Rajarambapu Institute of Technology, Sakhrale, in Association with Novateur Publications Journalnx-ISSN No: 2454-7875, April, 13th , 2018. TH-119.
Nikhil U. Kamble, Sharad D. Patil, "Techno economic analysis of solar PV system" Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) Rajarambapu Institute of Technology, Sakhrale, in Association with Novateur Publications Journalnx-ISSN No: 2454-7875, April, 13th , 2018. TH- 120.
Sharad D. Patil, Mathematical Modeling of Evaporation of Water Droplet, Its Implimentation And Validation TH- Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) Rajarambapu Institute of Technology, Sakhrale, in Association with Novateur Publications Journal -ISSN No: 2454-7875, April, 13th , 2018.TH-110.
Abhijit J. Patil, Sharad D. Patil, Numerical Analysis of Steam Flow In Steam Turbine Nozzle Blade Cascade, Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) Rajarambapu Institute of Technology, Sakhrale, in Association with Novateur Publications Journalnx-ISSN No: 2454-7875, April, 13th , 2018. TH-111.
Amit G. Sabasagi, Sharad D. Patil, Aerodynamic study of Flow over a Sphere, 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH134
Shwetali S Patil, Sharad D. Patil, Numerical Analysis of Mini-channel Metal Hydride Reactor for Hydrogen Storage, 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH514
Sagar A. Wangdare, Sharad D. Patil, Numerical study of fluid flow and heat transfer in microchannel heat sink, , 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH2796
Sumit C. Jakate, Sharad D. Patil, Optimization of pipe for pressure drop using Design of Experiment, 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH135
Swhali M Peerjade, Sharad D. Patil, Design Space Analysis and Parameter based Optimization of Downpipe by Response Surface Method, 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH164.
Krushna P. Shekde, Sharad D. Patil, Santosh T. Patil, „3D Numerical Simulation of Corrugated Tube Metal Hydride Based Hydrogen Storage System? published in Proceedings of the 2nd National Conference for Engineering Post Graduates, RIT NConPG-16. Paper No:CC201,PP-60-65.
Madhuri V. Nimbalkar, Sharad D. Patil, „Numerical Analysis of Metal Hydride Based Hydrogen Storage Reactor with Hollow Fins? Proceedings of the 2nd National Conference for Engineering Post Graduates, RIT NConPG-16. Paper No:CC205, PP 88-93.
“The performance and evaluation of oxygenated on diesel exhaust emissions”, presented at National Conference on Emerging Trends in Mechanical Engineering at BMS College of engineering Bangalore.
“Effect of oxygenates on diesel exhaust emissions” presented at National Seminar on Recent Advances in Mechanical Engineering at K.K. Wagh College of engineeringNasik
“Stability Analysis of single phase flow by numerical methods (CFD) in National conference on CAD/CAM/CAE at RIT Sakharale Dist- Sangli.
“An evaluation of oxygenated additives on diesel engine exhaust emissions” presented at National Conference on Advances in Mechanical Engineering at College of engineering, Pandharpur.
Patents (Filed)