logo
logo
Mechanical Engineering
RIT Faculty
Dr. R. G. Desavale
Associate Professor
Contact info:

Ph.D. (2014)

National Institute of Technology, Warangal 

M. E. (Mechanical Design Engineering) (2001)

Shivaji University, Kolhapur

B. E. (Automobile Engineering) (1998)

Shivaji University, Kolhapur

Teaching Experience: 18 years

2017

Associate Professor, Rajarambapu Institute of Technology, Rajaramnagar

2015-2017

Professor, Annasaheb Dange College of Engineering and Technology, Ashta

2011-2015

Associate Professor, Annasaheb Dange College of Engineering and Technology, Ashta

2009-2011

Assistant Professor, Annasaheb Dange College of Engineering and Technology, Ashta

2001-2009

Lecturer, Rajarambapu Institute of Technology, Rajaramnagar

  • Rotor Dynamics
  • Vibrations
  • Rolling element Bearing Analysis
  • Vibrations based Condition Monitoring of Industrial Rotating Machines
  • Design and Dynamics
  • Mathematical modeling of the behavior of rotating machines
A) Publications (in International Journals)
  • Desavale, R. G. and Shinde, P. V., 2022, “Implementation of Novel Feature Sets for Fault Prediction of Rolling Bearings using K-Nearest Neighbor”, ASME Tribology, Revision under review. (H-84) (SCI, Impact Factor: 2.045)
  • Desavale, R. G., 2022, “Fault Identification and interaction effects in nonlinear rotor-bearing system with integrated model-based dimensional analysis and central composite rotatable design (CCRD”, ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg, revision under review. (H-7) (ESCI, Scopus Indexed)
  • Salunkhe, V. G., R. G. Desavale, and Surajkumar G. Kumbhar. 2022. “Vibration Analysis of Deep Groove Ball Bearing Using Finite Element Analysis and Dimension Analysis.” Journal of Tribology 144 (8). pp. 081202 https://doi.org/10.1115/1.4053262. (H-84) (SCI, Impact Factor: 2.045)
  • Vishwendra, More A, Pratiksha S Salunkhe, Shivanjali V Patil, Sumit A Shinde, P V Shinde, R G Desavale, P M Jadhav, and Nagaraj V Dharwadkar. 2022. “A Novel Method to Classify Rolling Element Bearing Faults Using K-Nearest Neighbor Machine Learning Algorithm.” ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg 8 (3) pp. 031202. https://doi.org/10.1115/1.4053760. (H-13) (ESCI, Scopus Indexed)
  • Shinde, Prasad V, and Ramchandra G Desavale. 2022. “Application of Dimension Analysis and Soft Competitive Tool to Predict Compound Faults Present in Rotor-Bearing Systems.” Measurement 193: 110984. https://doi.org/https://doi.org/10.1016/j.measurement.2022.110984. (H-91) (SCI, Impact Factor:3.927)
  • Salunkhe, Vishal G, R G Desavale, and T Jagadeesha. 2021. “A Numerical Model for Fault Diagnosis in Deep Groove Ball Bearing Using Dimension Theory.” Materials Today: Proceedings 47: 3077–81. https://doi.org/https://doi.org/10.1016/j.matpr.2021.06.072. (H-74) (Scopus Indexed)
  • Suryawanshi, Ganesh L, Sachin K Patil, and Ramchandra G Desavale. 2021. “Dynamic Model to Predict Vibration Characteristics of Rolling Element Bearings with Inclined Surface Fault.” Measurement 184: 109879. https://doi.org/https://doi.org/10.1016/j.measurement.2021.109879. (H-91) (SCI, Impact Factor:3.927)
  • Kumbhar, Surajkumar G, R G Desavale, and Nagaraj V Dharwadkar. 2021. “Fault Size Diagnosis of Rolling Element Bearing Using Artificial Neural Network and Dimension Theory.” Neural Computing and Applications 33 (23): 16079–93. https://doi.org/10.1007/s00521-021-06228-8. (H-80) (SCI, Impact Factor:5.606)
  • Desavale, R G, P M Jadhav, and Nagaraj V Dharwadkar. 2021. “Dynamic Response Analysis of Gearbox to Improve Fault Detection Using Empirical Mode Decomposition and Artificial Neural Network Techniques.” ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg 7 (3). https://doi.org/10.1115/1.4051344. (H-13) (ESCI, Scopus Indexed)
  • Salunkhe, Vishal G, and R G Desavale. 2021. “An Intelligent Prediction for Detecting Bearing Vibration Characteristics Using a Machine Learning Model.” Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems 4 (3), pp. 1-20. https://doi.org/10.1115/1.4049938. (H-7) (ESCI, Scopus Indexed)
  • Suryawanshi, Ganesh L, Sachin K Patil, and Ramchandra G Desavale. 2021. “Evaluation of the Mechanical and Tribological Characteristics of AA6061/TiB2 Metal Matrix Composite and Parametric Optimisation of Its Casting Process by Using Taguchi Technique and NSGA-II.” International Journal of Materials Engineering Innovation 12 (3): 207–33. https://doi.org/10.1504/IJMATEI.2021.116945. (H-10) (Scopus Indexed)
  • Salunkhe, Vishal G, R G Desavale, and T Jagadeesha. 2021. “Experimental Frequency-Domain Vibration Based Fault Diagnosis of Roller Element Bearings Using Support Vector Machine.” ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg 7 (2). https://doi.org/10.1115/1.4048770. (H-13) (ESCI, Scopus Indexed)
  • Patil, Sushant M, R G Desavale, and Surajkumar G Kumbhar. 2021. “Roller Element Bearing Fault Size Estimation Using Adaptive Neurofuzzy Inference System.” ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg 7 (1). https://doi.org/10.1115/1.4048656. (H-13) (ESCI, Scopus Indexed)
  • Kumbhar, Surajkumar G, Edwin Sudhagar P, and R G Desavale. 2020. “An Overview of Dynamic Modeling of Rolling-Element Bearings.” Noise & Vibration Worldwide 52 (1–2): 3–18. https://doi.org/10.1177/0957456520948279. (H-14) (Scopus Indexed)
  • Jadhav, Prakash M, Surajkumar G Kumbhar, R G Desavale, and Shubham B Patil. 2020. “Distributed Fault Diagnosis of Rotor-Bearing System Using Dimensional Analysis and Experimental Methods.” Measurement 166: 108239. https://doi.org/https://doi.org/10.1016/j.measurement.2020.108239. (H-91) (SCI, Impact Factor:3.927)
  • Kumbhar, Surajkumar G, Edwin Sudhagar P, and R G Desavale. 2020. “Theoretical and Experimental Studies to Predict Vibration Responses of Defects in Spherical Roller Bearings Using Dimension Theory.” Measurement 161: 107846. https://doi.org/https://doi.org/10.1016/j.measurement.2020.107846. (H-91) (SCI, Impact Factor:3.927)
  • Shinde, P V, R G Desavale, V R Patil, P M Gawali, and S M Patil. 2020. “Modeling, Attenuation and Flow Field Analysis of Diesel Engine Muffler Using Fluid Structure Interaction Approach and Experimental Analysis.” SN Applied Sciences 2 (5): 920. https://doi.org/10.1007/s42452-020-2683-6. (ESCI, Scopus Indexed)
  • Desavale, R G. 2018. “Dynamics Characteristics and Diagnosis of a Rotor-Bearing’s System Through a Dimensional Analysis Approach: An Experimental Study.” Journal of Computational and Nonlinear Dynamics 14 (1), pp. 014501. https://doi.org/10.1115/1.4041828. (H-48) (SCI, Impact Factor:2.085)
  • R G Desavale, and S P Chavan. 2016. “Experimental-Based Fault Diagnosis of Rolling Bearings Using Artificial Neural Network.” Journal of Tribology 138 (3), pp. 031103. https://doi.org/10.1115/1.4032525. (H-84) (SCI, Impact Factor:2.045)
  • Desavale, R G, Rafiq Abu Kanai, S P Chavan, R Venkatachalam, and P M Jadhav. 2015. “Vibration Characteristics Diagnosis of Roller Bearing Using the New Empirical Model.” Journal of Tribology 138 (1), pp. 011103-1-9. https://doi.org/10.1115/1.4031065. (H-84) (SCI, Impact Factor:2.045)
  • Desavale, R G, and Asmita R Mali. 2016. “Detection of Damage of Rotor-Bearing Systems Using Experimental Data Analysis.” Procedia Engineering 144: 195–201. https://doi.org/https://doi.org/10.1016/j.proeng.2016.05.024. (H-74) (Scopus Indexed)
  • Desavale, R G, and V G Salunkhe. 2016. “Damage Detection of Roller Bearing System Using Experimental Data.” Procedia Engineering 144: 202–7. https://doi.org/https://doi.org/10.1016/j.proeng.2016.05.025. (H-74) (Scopus Indexed)
  • Desavale, R G, R Venkatachalam, and S P Chavan. 2014. “Experimental and Numerical Studies on Spherical Roller Bearings Using Multivariable Regression Analysis.” Journal of Vibration and Acoustics 136 (2), pp. 021022-1-10. https://doi.org/10.1115/1.4026433. (H-82) (SCI, Impact Factor:1.583)
  • Desavale, R G, R Venkatachalam, and S P Chavan. 2013. “Antifriction Bearings Damage Analysis Using Experimental Data Based Models.” Journal of Tribology 135 (4), pp. 041105-1-12. https://doi.org/10.1115/1.4024638. (H-84) (SCI, Impact Factor:2.045)
  • Desavale, R. G., Kumbhar, S. G., and Shinde, A. A., 2014, “Theoretical and experimental studies on vibrations produced by defects in taper roller bearing using vibration signature analysis”, International Journal of Engineering and Research Technology, ISSN No. 2278-0181, Volume 3, Issue 05, pp. 1270-1283.
  • Desavale, R. G., Shinde, A. A., and Kumbhar, S. G., 2014, “Theoretical and experimental studies on vibrations produced by defects in double row ball bearing using response surface method”, International Journal of Research in Engineering and Technology, ISSN: 2319-1163 | ISSN: 2321-7308, Volume 3, Issue 07, pp. 140-145.
  • Desavale, R.G., and Pathak, L.M., 2013, “Analysis of vibration characteristics for annular disc cutters”, International Journal of Engineering Science, 3(4), pp 32-38. (UGC Approved)
  • Desavale, R.G., and Rakate, G. N., 2013, “Structural design of overhanging pressure vessel support used in pyrolysis process using non- linear finite element analysis for structural stability”, International Journal of Engineering Research and Technology, Vol. 2 , No. 6, pp. 2036-2042.
  • Desavale, R.G., and Patil, S.M., 2013, “Conceptual structure design through thickness optimization of high pressure and high temperature self-regulated pressure valve using non-linear transient finite element method”, International Journal of Engineering Research and Technology, Vol. 2, No. 6, pp. 2043-2049.
  • Desavale, R.G., and Chavan, S.S., 2013, “Experimental investigation of effect of angular positioning of legs on structural stability of pressure vessel and by using non- linear finite element analysis”, International Journal of Engineering Research and Technology, Vol. 2, No. 6,pp. 2050-2057.
  • Desavale, R.G., and Patil, A.M., 2013, “Theoretical and experimental analysis of torsional and bending effect on four cylinders engine crankshafts by using finite element approach”, International Journal of Engineering Research, Vol. 2, pp.1-10
B) Publications (in Indian Journals)
  • Desavale, R. G., Jadhav, P.M., and Kanai,  R. A., 2009, “Theoretical & Experimental analysis of cantilever type main system to which multi-mass parallel & series  Tuned DVA’s are attached”, Journal of The Institution of Engineers (India)-Mechanical Engineering Division  30,  PP.-30-35.
C) Publications (in peer-reviewed conferences held abroad)
  • Nil
D) Publications /Presentation(in peer-reviewed conferences held in India)
  • Prasad V. Shinde, Ramchandra G. Desavale, 2021, An Investigation of Unbalance in Rotor Bearing System Using Matrix Method and Experimental Approach, ICADT 2021 ,International Conference on Advancements in Design and Tribology, 17-18 December 2021, Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat ,India.
  • S.A. Shinde, S. V. Patil, P. S. Salunkhe and, R.G. 2021, Compound Fault Diagnosis of Rotor Bearing System Using K-NN Machine Learning Approach, ICADT 2021 ,International Conference on Advancements in Design and Tribology, 17-18 December 2021, Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat ,India.
  • Vishal G. Salunkhe, Ramchandra G. Desavale, 2021, Experimental Mathematical Model for Diagnosis of Vibrations Generated in Defective Rolling Element Bearings, ICADT 2021 ,International Conference on Advancements in Design and Tribology, 17-18 December 2021, Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat ,India.
  • S.M. Patil, R. G. Desavale, P. V. Shinde, V.R. Patil, 2020, Comparative study of response of vibrations for circular and square defects on components of cylindrical roller bearing under different conditions, 4th International Conference on Innovative, Design, Analysis & Development Practices (I-DAD 2020) in Aerospace and Automotive Engineering, 24-26 February 2020, Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, Avadi, Chennai, India.
  • Santosh R. Patil, S. Krishna, S. S. Gawade, R. G. Desavale, 2019, An Experimental Investigation of Electrorheological Fluid Damper Recoil System used in Heavy Duty Application, International Mechanical Engineering Congress and Exposition IMECE2019, 11-14 November 2019, ASME, Salt Lake City, UT, USA
  • Desavale, R.G., Mali, A. R., 2014, “Detection of Damage of Rotor-Bearing Systems using Experimental Data Analysis”, 12th International conference on vibration problems, IIT, Guwahati, India.
  • Desavale, R.G., Venkatachalam, R., and Chavan, S.P., 2013, “Fault diagnosis of antifriction bearings due to localized defects using multivariable regression analysis”, 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM 2013), December, 18-20, Mechanical and Industrial Engineering Department, IIT, Roorkee, India.
  • Desavale, R.G., Venkatachalam, R., and Chavan, S.P., 2012, “Dynamic model of antifriction bearings - model development and case study using experimental data based models”, Proceedings of ACMFMS 2012, International conference on Mechanics of Functional Materials and structures, 5-8, December, IIT Delhi, pp. 593-596.
  • Desavale, R. G., Jadhav, P.M., and Kanai, R. A., 2008, “Theoretical Performance Analysis of the Pro-active World Suspension System”, Second International Conference on “Resource Utilization and Intelligent Systems” INCRUIS-2008. At Kongu Engineering College, Perundurai Erode-Tamilnadu, India, January 3-5, pp.
  • Desavale, R. G., Jadhav, P.M., and Kanai, R. A., 2008, “Active roll control of heavy duty road vehicles”, Second International Conference on “Resource Utilization and Intelligent Systems” INCRUIS-2008. January 3-5, At Kongu Engineering College, Perundurai Erode-Tamilnadu, India, January 3-5.
  • Desavale, R. G., Jadhav, P.M., and Kanai, R. A., 2007, “Theoretical & Experimental analysis of cantilever type main system to which multi-mass parallel & series DVA’s are attached”, International conference on Advance in Machine Design & Industry Automation (ICAMDIA-2007) organized by Dept. of Mech. Engg., College of Engg. Pune, Jan. 10-12, pp. MD 71 – MD 75.
  • Desavale, R. G., Jadhav, P.M., and Kanai, R. A., 2007, “Human Engineering Aspects in Automobile Systems Design”, International conference on Advance in Machine Design and Industry Automation (ICAMDIA-2007) organized by Dept. of Mech. Engg., College of Engg. Pune, Jan. 10-12, pp. VD 266 – VD 270.
E) National Conference
  • Desavale, R.G., et al, 2010, “Using vibration analysis to detect early failure of rolling element bearing of induction motor” National Conference on Advanced trends in Mechanical Engineering, organized by P.V.P.I.T. Budhgaon, 30th March 2010, PP-72-75.
  • Desavale, R. G., et al 2010, “Advanced recent trends in Automobile Engineering- Use of Hydrogen as Alternative Fuel to power vehicle”, National Conference on Advanced trends in Mechanical Engineering, organized by P.V.P.I.T. Budhgaon, 30th March, 2010, PP-106-110.
  • Desavale, R.G., et al 2010, “On-line Condition Monitoring System using Vibration Analysis for Pump Bearing” National Conference on Advanced trends in Mechanical Engineering, organized by ADCET, Ashta, 2nd July, pp.
  • Desavale, R. G., P. Jadhav P.M., and Kanai, R. A., 2004, “Neural Network approach for Predicting Material Properties,” proceedings of National Seminar on “Emerging Trends in Mechatronics”, organized by M.I.T., Aurangabad on 23 – 24 July, pp 92-95.
  • Desavale, R. G., Katu, U. S., and Kanai,  R. A., 2003, “Effect of Vehicle Vibration on Human Body”, 11th National Seminar on “Mechanisms & Mechanical Vibration”, IIT Delhi, 18-20 December, pp. 
  • Desavale, R. G., and Bimlesh, Kumar., 2000, “Theoretical and Experimental Analysis of Cantilever Type Main System to which Multi mass (Two masses) DVA are attached”, proceedings of the 16th National Convention of the Mechanical Engineers, organized by University of Roorkee from 29 – 30 September, pp 193 – 199.
  • Desavale, R. G., Ghunakikar, S., 1999, “Sound and Vibration Control”, in Technoexcellence-1999, at R.I.T., Rajaramnagar on 26th March. 
F) International Conference
  • Nil
G) Book
i) Books Published
  • Nil
ii) Chapters in Book
  • Mohite, A. P., Badadhe, A. M., Desavale, R. G., Investigation of Vibration Characteristics of Ball Bearing Defects Using Dimensional Analysis, Springer Book on Advances in Rotor Dynamics, Control, and Structural Health Monitoring, pp. 63-72.
  • Jagadeesha, T., Salunkhe, V. G., Desavale, R. G., Patil, P. B., Kumbhar, M, B., Koli, A. R., Investigation of Crack Detection Technique in a Rotating Shaft by Using Vibration Measurement, Springer Book on Advances in Industrial Automation and Smart Manufacturing, pp. 631-645.
  • Patil, S. M., Desavale, R. G., Shinde, P. V., Patil, V. R., Comparative Study of Response of Vibrations for Circular and Square Defects on Components of Cylindrical Roller Bearing Under Different Conditions, Springer Book on Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering, pp. 189-198.Sept. 2020. (Scopus Indexed)
H) Patents

i) Patents (Filed)

01

  • Life Member of ISTE, New Delhi
  • SAEINDIA Membership
  • Some Studies on the Nonlinear Dynamic Modelling of Antifriction Bearings for Fault Diagnosis  Vibration and Noise Analysis of Parallel Shaft Gear Drive Systems
  • Automatic Sugarcane Plantation, Duration-2022, Project cost (Rs.)-4.85 Lakhs, Funding Agency- RGSTC
  • Prerana – Scheme for preparing SC/ST Students for Higher education, Duration-02 Years 2019, Project cost (Rs.)-8.05 Lakhs, Funding Agency-AICTE
  • Modernisation and Removal of Obsolescence (MODROBS) for Vibration Engineering Lab, Duration-02 Years 2020, Project cost (Rs.)-16.20 Lakhs, Funding Agency-AICTE